Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Japanese

Translating step 2

Step 2
Make sure that the clip used to release the side panel is open or the Hard Drive bays won't slide out Pull the Hard Drive straight out by grabbing the metal sled from the bottom. It may be hard to pull out at first, but after it gets released the sled shouldn't take a lot of effort to remove. Pull the Hard Drive straight out by grabbing the metal sled from the bottom. It may be hard to pull out at first, but after it gets released the sled shouldn't take a lot of effort to remove.
Remove the Hard Drive Bay
  • Make sure that the clip used to release the side panel is open or the Hard Drive bays won't slide out

  • Pull the Hard Drive straight out by grabbing the metal sled from the bottom. It may be hard to pull out at first, but after it gets released the sled shouldn't take a lot of effort to remove.

サイドパネル取り外しに使用したクリップが開いているか、もしくはハードドライブベイがスライドしないことを確認してください

底からメタル製スレッドをつかんで、ハードドライブをまっすぐ引き出します。 最初の作業は少し難しいかもしれませんが、外れれば、取り外し作業は簡単です。

Your contributions are licensed under the open source Creative Commons license.