Skip to main content
English
Spanish

Translating step 1

Step 1
Remove the following Phillips #00 screws securing the LCD shield plate to the front panel: One 1.7 mm screw Six 1.6 mm screws (three on each side)
  • Remove the following Phillips #00 screws securing the LCD shield plate to the front panel:

  • One 1.7 mm screw

  • Six 1.6 mm screws (three on each side)

Quita los siguientes tornillos Phillips #00 asegurando la placa de cobertura de LCD al panel frontal:

Un tornillo de 1,7 mm

Seis tornillos de 1,6 mm (tres en cada lado)

Your contributions are licensed under the open source Creative Commons license.