Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 23 guides that include this step.

English
French

Translating step 3

Step 3
Pinch the rear panel with your fingers and lift it  away from the iPhone. Alternatively, use a Small Suction Cup .
  • Pinch the rear panel with your fingers and lift it away from the iPhone. Alternatively, use a Small Suction Cup .

  • Be careful not to damage the plastic clips attached to the rear panel.

  • If you are installing a new rear panel, be sure to remove the plastic protective sticker from the inside of the camera lens and the sticker from the large black area near the lens.

Attrapez la vitre arrière et retirez-la de l'iPhone. Vous pouvez également utiliser une petite ventouse.

Veillez à ne pas endommager les clips en plastique attachés à la vitre arrière.

Si vous installez une nouvelle vitre arrière, assurez-vous d'enlever l'autocollant de protection en plastique de l'intérieur de la lentille de la caméra et l'autocollant de la large zone noire près de la lentille.

Your contributions are licensed under the open source Creative Commons license.