Skip to main content
English
German

Translating step 7

Step 7
To disconnect the heat sink thermal sensor, pinch its cables between your thumb and a spudger and pry the spudger upward to lift the connector up and out of its socket on the logic board.
  • To disconnect the heat sink thermal sensor, pinch its cables between your thumb and a spudger and pry the spudger upward to lift the connector up and out of its socket on the logic board.

Klemme, um den Thermosensor abzutrennen, das Kabel zum Thermosensor zwischen deinem Daumen und einem Spudger und heble mit dem Spudger hoch, um den Stecker aus seinem Anschluss auf dem Logic Board zu lösen.

Your contributions are licensed under the open source Creative Commons license.