Fix Your Stuff Community Store

Mac mini Mid 2010 Hard Drive Replacement

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Previous step Next step

Translating step 4

Back to Guide
English
Korean
Step 4
Mac mini Mid 2010 Hard Drive Replacement: step 0, image 1 of 3 Mac mini Mid 2010 Hard Drive Replacement: step 0, image 2 of 3 Mac mini Mid 2010 Hard Drive Replacement: step 0, image 3 of 3

  • For enough clearance to remove the hard drive, the logic board must be slightly removed. To accomplish this, two cylindrical rods must be inserted into the holes highlighted in red.

  • Inserting instruments into any logic board holes other than the ones highlighted in red may severely damage the logic board.

  • Insert a Mac mini Logic Board Removal Tool into the two holes highlighted in red. Be sure it makes contact with the outer case below the logic board before proceeding.

  • If you don't have a Logic Board Removal Tool handy, you can use two tools having a maximum diameter of 2.5 mm instead. Just insert one into each of the highlighted holes.

  • Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case.

  • Cease prying when the I/O board is visibly separated from the outer case. Remove the Mac mini Logic Board Removal tool.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.