Skip to main content

Installazione della piastra dell'antenna nel Mac mini modello A1347

Notice: You are editing a prerequisite guide. Any changes you make will affect all 18 guides that include this step.

Translating step 2

English
Italian
Step 2
Mac mini Mid 2010 Antenna Plate Replacement: step 0, image 1 of 2 Mac mini Mid 2010 Antenna Plate Replacement: step 0, image 2 of 2
  • Slightly lift the antenna plate from the end closest to the RAM.

  • Carefully pull the antenna plate straight away from the circular rim of the outer case.

  • Do not remove the antenna plate yet. It is still attached to the AirPort/ Bluetooth board.

Sollevare delicatamente la piastra dell'antenna dall'estremità più vicina alla memoria RAM.

Estrarre con attenzione la piastra dell'antenna direttamente dalla montatura rotonda nel case esterno.

Non rimuovere ancora la piastra dell'antenna, poiché è ancora collegata alla scheda AirPort/Bluetooth.

Your contributions are licensed under the open source Creative Commons license.