Notice: You are editing a prerequisite guide. Any changes you make will affect all 18 guides that include this step.
Translating step 1
Step 1
-
Remove the following screws securing the antenna plate to the mini:
-
Two 6.6 mm T8 or T9 Torx screws
-
Two 5.0 mm T8 Torx or 2.0 mm Hex screws (either will work)
| [* black] Remove the following screws securing the antenna plate to the mini: | |
| - | [* red] Two 6.6 mm T8 Torx screws |
| + | [* red] Two 6.6 mm T8 or T9 Torx screws |
| [* orange] Two 5.0 mm T8 Torx or 2.0 mm Hex screws (either will work) |
Your contributions are licensed under the open source Creative Commons license.