Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 17 guides that include this step.

English
Dutch

Translating step 1

Step 1
Remove the following screws securing the antenna plate to the mini:
  • Remove the following screws securing the antenna plate to the mini:

  • Two 6.6 mm T8 Torx screws

  • Two 5.0 mm T8 Torx or 2.0 mm Hex screws (either will work)

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.