Skip to main content

Mac mini Mid 2010 アンテナプレートの交換

Notice: You are editing a prerequisite guide. Any changes you make will affect all 18 guides that include this step.

Translating step 1

English
Japanese
Step 1
Mac mini Mid 2010 Antenna Plate Replacement: step 0, image 1 of 1
  • Remove the following screws securing the antenna plate to the mini:

  • Two 6.6 mm T8 or T9 Torx screws

  • Two 5.0 mm T8 Torx or 2.0 mm Hex screws (either will work)

miniにアンテナプレートを固定している次のネジを外します。

6.6 mm T8トルクスネジー2本

5.0 mm T8トルクスネジ、もしくは2.0 mm六角ネジー2本

[* black] Remove the following screws securing the antenna plate to the mini:
- [* red] Two 6.6 mm T8 Torx screws
+ [* red] Two 6.6 mm T8 or T9 Torx screws
[* orange] Two 5.0 mm T8 Torx or 2.0 mm Hex screws (either will work)

Your contributions are licensed under the open source Creative Commons license.