Fix Your Stuff Community Store

Installation de la plaque d'antenne du Mac mini modèle A1347

Notice: You are editing a prerequisite guide. Any changes you make will affect all 18 guides that include this step.

Next step

Translating step 1

Back to Guide
English
French
Step 1
Mac mini Mid 2010 Antenna Plate Replacement: step 0, image 1 of 1

  • Remove the following screws securing the antenna plate to the mini:

  • Two 6.6 mm T8 or T9 Torx screws

  • Two 5.0 mm T8 Torx or 2.0 mm Hex screws (either will work)

Retirez les vis suivantes par lesquelles la plaque d'antenne est fixée au mini :

Deux vis Torx T8 6,6 mm.

Deux vis Torx T8 5 mm ou Hex 2 mm (les deux fonctionnent)

[* black] Remove the following screws securing the antenna plate to the mini:
- [* red] Two 6.6 mm T8 Torx screws
+ [* red] Two 6.6 mm T8 or T9 Torx screws
[* orange] Two 5.0 mm T8 Torx or 2.0 mm Hex screws (either will work)

Your contributions are licensed under the open source Creative Commons license.