Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

English
German

Translating step 3

Step 3
If present, remove the small strip of black tape covering the left speaker connector.
  • If present, remove the small strip of black tape covering the left speaker connector.

  • Carefully pull the left speaker wires upward to lift the left speaker connector out of its socket on the logic board.

Entferne, falls vorhanden, das kleine Stückchen schwarzes Klebeband, welches den Stecker des linken Lautsprechers bedeckt.

Ziehe vorsichtig die Kabel des linken Lautsprechers nach oben, um den Stecker des linken Lautsprechers aus seinem Sockel auf dem Logic Board zu heben.

Your contributions are licensed under the open source Creative Commons license.