Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.


Translating step 14

Step 14
Remove the following screws:
  • Remove the following screws:

  • Seven 3.3 mm T6 Torx screws securing the logic board to the upper case.

  • Two 8 mm T6 Torx screws securing the DC-In board to the upper case.

  • Do not remove the logic board yet! There are components on the underside of the logic board attached to the the upper case that must first be disconnected.


7个将主板固定在金属壳上的 3.3 mm T6 Torx 螺丝

两个固定电源板的8 mm T6 Torx螺丝


Your contributions are licensed under the open source Creative Commons license.