Skip to main content

Fix Your Stuff

Right to Repair

Store

English
German

Translating step 3

Step 3
Remove the two 40mm screws from the base of the thermostat using a #0 Phillips screw driver.
Remove screws from wall
  • Remove the two 40mm screws from the base of the thermostat using a #0 Phillips screw driver.

Entfernen Sie die beiden 40 mm Schrauben von dem/der Sockel/Basis des Thermostats mit einem Kreuzschlitzschraubendreher (Phillips #0).

Your contributions are licensed under the open source Creative Commons license.