Skip to main content
English
Italian

Translating step 3

Step 3
Rotate the device so that the side with the circuit board is facing towards you. Pull the sides of the metal CD assembly case out slightly to disengage the clasps holding the encasing down.
Removing the CD assembly case
  • Rotate the device so that the side with the circuit board is facing towards you.

  • Pull the sides of the metal CD assembly case out slightly to disengage the clasps holding the encasing down.

  • Repeat the previous step on the other side.

  • Rotate the device so that the front is facing towards you.

  • Lift the metal CD assembly case up and away from the device.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.