Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
German

Translating step 4

Step 4
Remove the two screws at the bottom right corner of the front panel using a Phillips head screwdriver, as shown in the image. Two 3.35mm Philips head screws
Remove antenna and disconnect the PCB board
  • Remove the two screws at the bottom right corner of the front panel using a Phillips head screwdriver, as shown in the image.

  • Two 3.35mm Philips head screws

  • Use tweezers to disconnect the antenna from the logic board to the PCB board.

  • Remove the tape connected to the motherboard.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.