Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
Japanese

Translating step 5

Step 5
Remove the tape holding the battery in place. Gently lift the battery from the bottom using a plastic opening tool. You may have to apply heat to melt the glue holding the battery in place.
Disconnect the battery and remove PCB board
  • Remove the tape holding the battery in place.

  • Gently lift the battery from the bottom using a plastic opening tool.

  • You may have to apply heat to melt the glue holding the battery in place.

  • Do not completely remove the battery yet

  • You can now disconnect the flex cable holding the PCB board place. Gently open the gates using tweezers or a plastic opening tool and use tweezers to slide the flex cable out.

  • Now that it's separated, remove and set aside the PCB board.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.