Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 19 guides that include this step.

Back to Guide
English
French
Previous step

Translating step 3

Step 3
Lift up the right side of the clutch cover and guide the display data and iSight cables through the gap in the clutch cover.

  • Lift up the right side of the clutch cover and guide the display data and iSight cables through the gap in the clutch cover.

  • Lift the clutch cover out of the display assembly.

  • During reassembly, make sure not to pinch the backlight cable (with the white connector on the right side) when snapping the clutch cover back into place. This cable has two visible wires leading into the lower right section of the LCD display to the backlight. (The models with pink and white wires are usually longer and easier to pinch.)

Soulevez le côté droit du cache charnière et guidez le câble de données de l'écran et la nappe iSight à travers le trou dans le cache charnière.

Ôtez le cache charnière de l'ensemble écran.

Lors du remontage, veillez à ne pas coincer la nappe du rétroéclairage (avec le connecteur blanc) quand vous remettez le cache charnière en place. La nappe est composée de deux fils visibles menant à la partie inférieure droite de l'écran LCD. (Certains modèles sont munis de fils rose et blanc qui sont plus longs et se coincent plus facilement.)

[* black] Lift up the right side of the clutch cover and guide the display data and iSight cables through the gap in the clutch cover.
[* black] Lift the clutch cover out of the display assembly.
[* icon_reminder] During reassembly, make sure not to pinch the backlight cable (with the white connectorconnector on the right side) when snapping the clutch cover back into place. This cable has two visible wires leading into the lower right section of the LCD display to the backlight. (The models with pink and white wires are usually longer and easier to pinch.)
[* icon_reminder] During reassembly, make sure not to pinch the backlight cable (with the white connectorconnector on the right side) when snapping the clutch cover back into place. This cable has two visible wires leading into the lower right section of the LCD display to the backlight. (The models with pink and white wires are usually longer and easier to pinch.)

Your contributions are licensed under the open source Creative Commons license.