Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
German

Translating step 10

Step 10
Remove the following Phillips screws securing the angled logic board bracket. One 2.6 mm screw
  • Remove the following Phillips screws securing the angled logic board bracket.

  • One 2.6 mm screw

  • One 1.3 mm screw, located horizontally in the upper sidewall of the iPhone.

Entferne die folgenden beiden Kreuzschlitzschrauben, die die abgewinkelte Logic Board Klammer befestigen:

Eine 2,6 mm Schraube

Eine 1,3 mm Schraube, die horizontal im oberen Rand des iPhones sitzt

Your contributions are licensed under the open source Creative Commons license.