Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
Spanish

Translating step 5

Step 5
When disconnecting the following connectors, only pry up on the connector, not the socket on the logic board or you risk permanent damage. Use the flat end of a spudger to lift the power button and flash assembly cable connector up off of its socket. Lift the volume control cable connector up out of its socket on the logic board.
  • When disconnecting the following connectors, only pry up on the connector, not the socket on the logic board or you risk permanent damage.

  • Use the flat end of a spudger to lift the power button and flash assembly cable connector up off of its socket.

  • Lift the volume control cable connector up out of its socket on the logic board.

Cuando desconectes los siguientes conectores, solo haz palanca en el conector, no en el enchufe en la placa logica o arriesgas daño permanente.

Utiliza la parta plana de un spudger para levantar el boton de encendido y el ensamblaje del cable del conector de flash fuera de su enchufe.

Levanta el conector de cable de control de volumen fuera de su enchufe en la placa logica.

Your contributions are licensed under the open source Creative Commons license.