Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
Italian

Translating step 1

Step 1
Use Tweezers to disconnect the ribbon cable connecting the fingerprint sensor to the motherboard. When replacing the fingerprint sensor, make sure the ribbon cable snaps into the port on the motherboard.
  • Use Tweezers to disconnect the ribbon cable connecting the fingerprint sensor to the motherboard.

  • When replacing the fingerprint sensor, make sure the ribbon cable snaps into the port on the motherboard.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.