Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 43 guides that include this step.

English
Japanese

Translating step 2

Step 2
Starting on the left of the display, near the power button, insert the iMac Opening Tool into the gap between the glass panel and the rear case. The hub on the iMac Opening Tool will keep you from pushing the wheel in too far. If using a different tool, insert no more than 3/8" (9.5 mm) into the display. You risk severing antenna cables and causing serious damage. The hub on the iMac Opening Tool will keep you from pushing the wheel in too far. If using a different tool, insert no more than 3/8" (9.5 mm) into the display. You risk severing antenna cables and causing serious damage.
  • Starting on the left of the display, near the power button, insert the iMac Opening Tool into the gap between the glass panel and the rear case.

  • The hub on the iMac Opening Tool will keep you from pushing the wheel in too far. If using a different tool, insert no more than 3/8" (9.5 mm) into the display. You risk severing antenna cables and causing serious damage.

ディスプレイの左側、つまり電源ボタンに近い方から始めます。iMacオープニングツールをガラス面とケースの側面の間に差し込みます。

iMacオープニングツールのハブ(車輪の中心部)は、ホイールをあまりにも押しすぎないようにします。 別の工具を使用する場合は、ディスプレイに3/8インチ(9.5 mm)を超えて挿入しないでください。アンテナケーブルを切断して重大な損傷を引き起こす危険性があります。

Your contributions are licensed under the open source Creative Commons license.