Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 20 guides that include this step.

English
Italian

Translating step 1

Step 1
Remove the three 3.4 mm T6 Torx screws securing the left fan to the logic board.
  • Remove the three 3.4 mm T6 Torx screws securing the left fan to the logic board.

  • In some models, these T6 Torx screws may be 3.1 mm long.

Svita le tre viti Torx T6 da 3,4 mm che fissano la ventola sinistra alla scheda madre.

In alcuni modelli, queste viti Torx T6 potrebbero essere da 3,1 mm.

Your contributions are licensed under the open source Creative Commons license.