Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 20 guides that include this step.

English
French

Translating step 1

Step 1
Remove the three 3.4 mm T6 Torx screws securing the left fan to the logic board.
  • Remove the three 3.4 mm T6 Torx screws securing the left fan to the logic board.

  • In some models, these T6 Torx screws may be 3.1 mm long.

Dévissez les trois vis Torx T6 de 3,4 mm (3,1 mm) fixant le ventilateur gauche à la carte mère.

Sur certains modèles ces vis Torx T6 peuvent avoir une longueur de 3,1 mm.

Your contributions are licensed under the open source Creative Commons license.