Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
French

Translating step 1

Step 1
Remove the following screws securing the antenna bracket to the rear case:
  • Remove the following screws securing the antenna bracket to the rear case:

  • One 1.5 mm Phillips #00 screw

  • One 2.8 mm Phillips #00 screw

Retirez les vis suivantes fixant le support d'antenne sur le boîtier arrière:

Une vis Phillips # 00 de1.5 mm

Une vis Phillips # 00 de 2,8 mm

Your contributions are licensed under the open source Creative Commons license.