Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Japanese

Translating step 1

Step 1
Use the tip of a spudger to gently pry up the sensor cable assembly from its recess in the display assembly. The cable is held in place with a mild adhesive.
  • Use the tip of a spudger to gently pry up the sensor cable assembly from its recess in the display assembly.

  • The cable is held in place with a mild adhesive.

スパッジャーの先端を使って、ディスプレイアセンブリの角からセンサーケーブルアセンブリを引き上げていきます。

ケーブルは適度な接着剤で留められています。

Your contributions are licensed under the open source Creative Commons license.