Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
French

Translating step 4

Step 4
Carefully wedge the tip of a spudger underneath the home button connector cable.
  • Carefully wedge the tip of a spudger underneath the home button connector cable.

  • Gently move the spudger across to separate the home button connector cable from the adhesive securing it to the front panel assembly.

  • If the cable doesn't separate easily, apply heat using an iOpener or hair dryer to soften the adhesive, and try again. Be careful not to damage the cable.

Insérez délicatement la pointe d'une spatule (spudger) sous la nappe de connexion du bouton home.

Poussez la spatule délicatement pour décoller la nappe de la bande adhésive qui l'attache à l'écran.

Si la nappe ne s'enlève pas facilement, faites-la chauffer avec un iOpener ou un sèche-cheveux pour que la bande adhésive ramollisse, puis réessayez. Veillez à ne pas endommager la nappe.

Your contributions are licensed under the open source Creative Commons license.