Skip to main content
English
German

Translating step 2

Step 2
There is one screw holding each floor sensor in place. Remove all and lift the sensor pieces out. Do not remove the clear sensor covers from the two centre spaces on bObi. Remove the clear covers on the outer two floor sensors and place them on your replacement pieces.
  • There is one screw holding each floor sensor in place. Remove all and lift the sensor pieces out.

  • Do not remove the clear sensor covers from the two centre spaces on bObi.

  • Remove the clear covers on the outer two floor sensors and place them on your replacement pieces.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.