Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 18 guides that include this step.

English
Dutch

Translating step 9

Step 9
Remove the following Phillips screws securing the front panel assembly cable bracket:
  • Remove the following Phillips screws securing the front panel assembly cable bracket:

  • Three 1.2 mm screws

  • One 1.5 mm screw

  • One 2.9 mm screw

  • Do not attempt to insert longer screws into the red marked screw holes. Doing so may result in irreparable damage to the logic board.

Verwijder de volgende Phillips schroeven die het plaatje over de kabel van de schermmodule bevestigen:

Drie 1.2 mm lange schroeven

Eén 1.5 mm lange schroef

Eén 2.9 mm lange schroef

Probeer geen langere schroeven in de met rood gemarkeerde schroefgaten te draaien. Doe je dit wel, dan kan dit permanente schade aan het logic board veroorzaken.

Your contributions are licensed under the open source Creative Commons license.