Fix Your Stuff Community Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 18 guides that include this step.

Back to Guide
English
Japanese
Previous step Next step

Translating step 9

Step 9
Remove the following Phillips screws securing the front panel assembly cable bracket:

  • Remove the following Phillips screws securing the front panel assembly cable bracket:

  • Three 1.2 mm screws

  • One 1.5 mm screw

  • One 2.9 mm screw

  • Do not attempt to insert longer screws into the red marked screw holes. Doing so may result in irreparable damage to the logic board.

フロントパネルアセンブリーのケーブルブラケットに留められたネジを外します。

1.2 mm ネジー3本

1.5 mm ネジー1本

2.9 mm ネジー1本

絶対に赤い丸印のネジ穴に長いネジを差し込まないでください。基板にダメージを与えてしまいます。

Your contributions are licensed under the open source Creative Commons license.