Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 18 guides that include this step.

English
Spanish

Translating step 9

Step 9
Remove the following Phillips screws securing the front panel assembly cable bracket:
  • Remove the following Phillips screws securing the front panel assembly cable bracket:

  • Three 1.2 mm screws

  • One 1.5 mm screw

  • One 2.9 mm screw

  • Do not attempt to insert longer screws into the red marked screw holes. Doing so may result in irreparable damage to the logic board.

Retira los siguientes tornillos Phillips que sujetan el soporte del cable del conjunto del panel frontal:

Tres tornillos de 1.2 mm

Un tornillo de 1.5 mm

Un tornillo de 2.9 mm

No intentes insertar tornillos más largos en los orificios de tornillo marcados en rojo. Hacerlo puede provocar daños irreparables en la placa lógica.

Your contributions are licensed under the open source Creative Commons license.