Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 23 guides that include this step.

English
Italian

Translating step 3

Step 3
Hold onto your iPhone securely and close the handle of the iSclack to separate the suction cups, pulling the front panel up from the rear case. The iSclack is designed to safely open your iPhone just enough to separate the pieces, but not enough to damage the display cables.
  • Hold onto your iPhone securely and close the handle of the iSclack to separate the suction cups, pulling the front panel up from the rear case.

  • The iSclack is designed to safely open your iPhone just enough to separate the pieces, but not enough to damage the display cables.

  • Peel the two suction cups off your iPhone.

  • Skip the next three steps and continue on to Step 8.

Mentre reggi saldamente il tuo iPhone, chiudi le maniglie dell'iSclack per separare le ventose, tirando verso l'alto il pannello anteriore rispetto al case posteriore.

L'iSclack è progettato per aprire in sicurezza il tuo iPhone in misura sufficiente a separare le parti, ma non abbastanza da poter danneggiare i cavi del display.

Stacca le due ventose dal tuo iPhone.

Salta i prossimi tre passi e continua con il passo 8.

Your contributions are licensed under the open source Creative Commons license.