Skip to main content

Fix Your Stuff

Right to Repair

Store

English
Japanese

Translating step 2

Step 2
The SATA data connector has a clip that must be pressed to allow removal. While pressing on the clip with your thumb, lift and disconnect the SATA data connector from its socket on the logic board. While pressing on the clip with your thumb, lift and disconnect the SATA data connector from its socket on the logic board.
  • The SATA data connector has a clip that must be pressed to allow removal.

  • While pressing on the clip with your thumb, lift and disconnect the SATA data connector from its socket on the logic board.

SATAデータコネクタにはクリップが付いており、摘むと外すことができます。

親指でクリップを押し込みながら、ロジックボード上のソケットからSATAデータコネクタを持ち上げて、接続を外します。

Your contributions are licensed under the open source Creative Commons license.