Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 80 guides that include this step.

English
Japanese

Translating step 11

Step 11
Gently twist the plastic card sideways to create a gap between the display and frame. Move slowly and be careful not to stress the display glass too much—you only need to make a gap of about 1/4".
  • Gently twist the plastic card sideways to create a gap between the display and frame.

  • Move slowly and be careful not to stress the display glass too much—you only need to make a gap of about 1/4".

ディスプレイとフレームの間に隙間を作るように、丁寧にプラスチックを外側に向けてひねります。

ディスプレイのガラスに圧力がかからないように注意しながら、ゆっくりと動かします。約6mm程度の隙間ができれば十分です。

Your contributions are licensed under the open source Creative Commons license.