Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 31 guides that include this step.

English
Spanish

Translating step 1

Step 1
Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess. The hard drive is attached by a single SATA power/data cable—do not attempt to fully remove it from the iMac yet. The hard drive is attached by a single SATA power/data cable—do not attempt to fully remove it from the iMac yet.
  • Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess.

  • The hard drive is attached by a single SATA power/data cable—do not attempt to fully remove it from the iMac yet.

Levanta el disco duro desde el borde más cercano a la placa lógica y extraelo un poco del hueco.

El disco duro está conectado por un solo cable de alimentación / datos SATA; no intentes extraerlo completamente del iMac todavía.

Your contributions are licensed under the open source Creative Commons license.