Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
German

Translating step 2

Step 2
Remove the following screws securing the fan to the rear enclosure:
  • Remove the following screws securing the fan to the rear enclosure:

  • Two 12.5 mm T10 screws

  • One 9.9 mm T10 screw

Entferne die folgenden Schrauben, welche den Lüfter am Rückgehäuse befestigen:

Zwei 12,5 mm Torx T10 Schrauben

Eine 9,9 mm Torx T10 Schraube

Your contributions are licensed under the open source Creative Commons license.