Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Japanese

Translating step 1

Step 1
It is recommended to stand the iMac vertically on its stand. Use the tip of a spudger to push the fan cable connector out of its socket on the logic board.
  • It is recommended to stand the iMac vertically on its stand.

  • Use the tip of a spudger to push the fan cable connector out of its socket on the logic board.

  • It is recommended to carefully push on both sides of the connector to walk it out of its socket.

iMacを垂直に立てた状態で作業を進めることをお勧めします。

スパッジャーの先端を使って、ロジックボード上のソケットからファンケーブルのコネクタをまっすぐ押し出します。

コネクターの両側を慎重に押してソケットから引き出すと上手くいきます。

Your contributions are licensed under the open source Creative Commons license.