Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
French

Translating step 1

Step 1
Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess. The hard drive is attached by a single SATA power/data cable, do not attempt to fully remove it from the iMac. The hard drive is attached by a single SATA power/data cable, do not attempt to fully remove it from the iMac.
  • Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess.

  • The hard drive is attached by a single SATA power/data cable, do not attempt to fully remove it from the iMac.

Soulevez le disque dur par le bord le plus proche de la carte mère et tirez-le légèrement hors de son logement.

Le disque dur est attaché par un seul câble SATA d'alimentation/de données, n'essayez pas de le retirer complètement de l'iMac.

Your contributions are licensed under the open source Creative Commons license.