Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
German

Translating step 12

Step 12
Gently peel the last horizontal portion off of the rear case. Do not remove the cable entirely, the cable is still attached by a connector taped to the upper component board.
  • Gently peel the last horizontal portion off of the rear case.

  • Do not remove the cable entirely, the cable is still attached by a connector taped to the upper component board.

Löse vorsichtig den letzten waagrechten Teil vom Rückgehäuse ab.

Entferne das Kabel noch nicht ganz. Das Kabel ist immer noch an einen Stecker angeschlossen, der mit Klebeband an der oberen Komponentenplatine befestigt ist.

Your contributions are licensed under the open source Creative Commons license.