Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
German

Translating step 7

Step 7
Gently peel the power and volume button cable away from the rear case. Bend the cable toward the inside of the rear case, but do not attempt to remove it as it is still connected to the upper component board. Bend the cable toward the inside of the rear case, but do not attempt to remove it as it is still connected to the upper component board.
  • Gently peel the power and volume button cable away from the rear case.

  • Bend the cable toward the inside of the rear case, but do not attempt to remove it as it is still connected to the upper component board.

Ziehe das Kabel des Lautstärkereglers und der Einschalttaste behutsam vom Rückgehäuse ab.

Biege das Kabel in das Innere des Rückgehäuses hinein, aber versuche noch nicht, es zu entfernen. Es ist immer noch an der oberen Komponentenplatine angeschlossen.

Your contributions are licensed under the open source Creative Commons license.