Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
German

Translating step 6

Step 6
Use the center screw hole of the volume control bracket to tilt it out toward the edge of the case and then pull it up out of its recess. Do not remove the bracket entirely as it is still attached to the button ribbon cable. Do not remove the bracket entirely as it is still attached to the button ribbon cable.
  • Use the center screw hole of the volume control bracket to tilt it out toward the edge of the case and then pull it up out of its recess.

  • Do not remove the bracket entirely as it is still attached to the button ribbon cable.

Benutze das mittlere Schraubenloch an der Halterung für den Lautstärkeregler, um sie zur Gehäusekante hin zu kippen und ziehe sie dann aus ihrer Vertiefung heraus.

Entferne die Halterung noch nicht ganz, sie ist immer noch am Flachbandkabel der Taste befestigt.

Your contributions are licensed under the open source Creative Commons license.