Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
German

Translating step 1

Step 1
Remove any foam tape from the top of the GPS cable ZIF connector. Use the tip of a spudger to flip the retaining tab on the ZIF connector to release the GPS cable.
  • Remove any foam tape from the top of the GPS cable ZIF connector.

  • Use the tip of a spudger to flip the retaining tab on the ZIF connector to release the GPS cable.

  • Do not attempt to disconnect this cable yet—it will come free when you remove the upper component board.

Entferne eventuell vorhandenes Schaumklebeband vom ZIF-Stecker des GPS-Kabels.

Klappe den Sicherungsbügel am ZIF-Anschluss mit der Spudgerspitze hoch und löse das GPS-Kabel ab.

Versuche noch nicht, das Kabel ganz abzutrennen, es wird frei werden, wenn du die obere Komponentenplatine ausbaust.

Your contributions are licensed under the open source Creative Commons license.