Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 25 guides that include this step.

English
Spanish

Translating step 3

Step 3
Remove the two 7.2 mm T10 Torx screws securing the power supply to the rear enclosure.
  • Remove the two 7.2 mm T10 Torx screws securing the power supply to the rear enclosure.

  • In newer model iMacs these are 7.2 mm T8 Torx screws.

  • During reassembly, be careful not to trap the power button wire behind the board.

Remueve los dos tornillos Torx T10 de 7.2 mm que aseguran la fuente de energía a la carcasa posterior.

En los nuevos modelos de iMac son tornillos Torx T8 de 7.2 mm.

[* red] Remove the two 7.2 mm T10 Torx screws securing the power supply to the rear enclosure.
[* icon_note] In newer model iMacs these are 7.2 mm T8 Torx screws.
[* icon_reminder] During reassembly, be careful not to trap the power button wire behind the board.

Your contributions are licensed under the open source Creative Commons license.