Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 80 guides that include this step.

English
Spanish

Translating step 2

Step 2
Starting on the left of the display, near the power button, insert the iMac Opening Tool into the gap between the glass panel and the rear enclosure. The hub on the iMac Opening Tool will keep you from pushing the wheel in too far. If using a different tool, insert no more than 3/8" into the display. Otherwise, you risk severing antenna cables and causing serious damage.
  • Starting on the left of the display, near the power button, insert the iMac Opening Tool into the gap between the glass panel and the rear enclosure.

  • The hub on the iMac Opening Tool will keep you from pushing the wheel in too far. If using a different tool, insert no more than 3/8" into the display. Otherwise, you risk severing antenna cables and causing serious damage.

Comenzando a la izquierda de la pantalla, cerca del botón de encendido, inserte la herramienta de apertura iMac en el espacio entre el panel de vidrio y la carcasa trasera.

El centro de la herramienta de apertura iMac evitará que empuje demasiado la rueda. Si usa una herramienta diferente, inserte no más de 3/8 "en la pantalla. De lo contrario, corre el riesgo de cortar los cables de la antena y causar daños graves.

Your contributions are licensed under the open source Creative Commons license.