Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
Dutch

Translating step 19

Step 19
Remove the five 3.5 mm T5 Torx screws securing the logic board to the upper case.
  • Remove the five 3.5 mm T5 Torx screws securing the logic board to the upper case.

  • When reassembling, install all five screws loosely, position the logic board, and then tighten evenly.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.