Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

English
Spanish

Translating step 10

Step 10
Temporarily leave your plastic card underneath the two rightmost battery cells to prevent them from re-adhering to the upper case. If using an iOpener, reheat it and reapply it, this time to the left-most battery cells. Again, leave the iOpener in each position for about a minute, reheating in between, to heat each half of the left-most battery cells.
  • Temporarily leave your plastic card underneath the two rightmost battery cells to prevent them from re-adhering to the upper case.

  • If using an iOpener, reheat it and reapply it, this time to the left-most battery cells.

  • Again, leave the iOpener in each position for about a minute, reheating in between, to heat each half of the left-most battery cells.

Deja temporalmente tu tarjeta de plástico debajo de las dos celdas de baterías del extremo derecho para prevenir que se vuelvan a adherir a la caja superior.

Si estás utilizando un iOpener, vuelve a calentar y aplicarlo, esta vez en las celdas de baterías del extremo izquierdo.

Nuevamente, deja el iOpener en cada posición durante un minuto, volviendo a calentar entremedio, para calentar cada mitad de las celdas de batería del extremo izquierdo.

Your contributions are licensed under the open source Creative Commons license.