Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
Italian

Translating step 3

Step 3
Pull, but do not remove, the camera end of the motherboard up from the midframe to allow access to the connectors on the rear. Do not attempt to fully remove the motherboard as it is still attached to the interior midframe by the Micro-USB port daughterboard connector.
  • Pull, but do not remove, the camera end of the motherboard up from the midframe to allow access to the connectors on the rear.

  • Do not attempt to fully remove the motherboard as it is still attached to the interior midframe by the Micro-USB port daughterboard connector.

Spingi, ma non rimuoverla, la scheda madre dall'estremità della fotocamera per separarla dal telaio centrale e consentire l'accesso ai connettori sul retro.

Non provare a rimuovere completamente la scheda madre perché è sempre collegata al telaio centrale interno dal connettore Micro-USB della scheda figlia.

Your contributions are licensed under the open source Creative Commons license.