Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
German

Translating step 3

Step 3
Pull, but do not remove, the camera end of the motherboard up from the midframe to allow access to the connectors on the rear. Do not attempt to fully remove the motherboard as it is still attached to the interior midframe by the Micro-USB port daughterboard connector.
  • Pull, but do not remove, the camera end of the motherboard up from the midframe to allow access to the connectors on the rear.

  • Do not attempt to fully remove the motherboard as it is still attached to the interior midframe by the Micro-USB port daughterboard connector.

Hebe die Hauptplatine am Kameraende leicht vom Mittelrahmen weg - aber entferne sie nicht ganz - um an die Verbinder auf der Rückseite zu gelangen.

Versuche nicht die Platine ganz zu entfernen, da sie weiterhin mit dem Inneren des Mittelrahmens durch den Verbinder des Mikro USB Anschlusses der Seitenplatine zusammenhängt.

Your contributions are licensed under the open source Creative Commons license.