Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
Japanese

Translating step 1

Step 1
Carefully wedge the tip of a spudger underneath the antenna cable connector. Delicately lift the spudger directly upwards to disconnect the antenna connector off its socket on the motherboard.
  • Carefully wedge the tip of a spudger underneath the antenna cable connector.

  • Delicately lift the spudger directly upwards to disconnect the antenna connector off its socket on the motherboard.

  • Some models have two antenna cables (blue and grey/white). Remove both of the cables.

スパッジャーの先端をアンテナケーブルコネクターの下に丁寧に差し込みます。

マザーボードのソケットからアンテナコネクターの接続を外すため、丁寧にまっすぐ上向きにスパッジャーを持ち上げます。

[* black] Carefully wedge the tip of a spudger underneath the antenna cable connector.
[* black] Delicately lift the spudger directly upwards to disconnect the antenna connector off its socket on the motherboard.
+[* icon_note] Some models have two antenna cables (blue and grey/white). Remove both of the cables.

Your contributions are licensed under the open source Creative Commons license.