Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
German

Translating step 33

Step 33
Pry up the logic board at the lower edge of the rectangular gap, near the EMI shield. Lift the end of the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener. Lift the end of the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener.
  • Pry up the logic board at the lower edge of the rectangular gap, near the EMI shield.

  • Lift the end of the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener.

Hebele das Logic Board am unteren Ende der rechteckigen Öffnung in der Nähe der EMI Abschirmung hoch.

Hebe nur ganz langsam hoch. Wenn du einen Widerstand spürst, halte an und benutze wieder den iOpener.

Your contributions are licensed under the open source Creative Commons license.