Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
German

Translating step 31

Step 31
Place a heated iOpener on the left side of the rear case, where the logic board is adhered.
  • Place a heated iOpener on the left side of the rear case, where the logic board is adhered.

  • Let the iOpener sit for at least a minute to soften the adhesive through the rear case.

Lege einen erwärmten iOpener auf den linken Rand des Gehäuses wo das Logic Board befestigt ist.

Lasse den iOpener mindestens eine Minute liegen, um den Kleber durch das Gehäuse hindurch zu erwärmen.

Your contributions are licensed under the open source Creative Commons license.